Epoxy

Epoxy adalah suatu kopolimer, terbentuk dari dua bahan kimia yang berbeda. Ini disebut sebagai "resin" dan "pengeras". Resin ini terdiri dari monomer atau polimer rantai pendek dengan kelompok epoksida di kedua ujung. Epoxy resin Paling umum yang dihasilkan dari reaksi antara epiklorohidrin dan bisphenol-A, meskipun yang terakhir mungkin akan digantikan dengan bahan kimia yang serupa. Pengeras terdiri dari monomer polyamine, misalnya Triethylenetetramine (Teta). Ketika senyawa ini dicampur bersama, kelompok amina bereaksi dengan kelompok epoksida untuk membentuk ikatan kovalen. Setiap kelompok NH dapat bereaksi dengan kelompok epoksida, sehingga polimer yang dihasilkan sangat silang, dan dengan demikian kaku dan kuat. Proses polimerisasi disebut "curing", dan dapat dikontrol melalui suhu, pilihan senyawa resin dan pengeras, dan rasio kata senyawanya; proses dapat mengambil menit untuk jam. Beberapa formulasi manfaat dari pemanasan selama masa penyembuhan, sedangkan yang lainnya hanya memerlukan waktu, dan suhu ambien. 

  

Read More

Abrasive

An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away. While finishing a material often means polishing it to gain a smooth, reflective surface it can also involve roughening as in satin, matte or beaded finishes.

Abrasives are extremely commonplace and are used very extensively in a wide variety of industrial, domestic, and technological applications. This gives rise to a large variation in the physical and chemical composition of abrasives as well as the shape of the abrasive. Common uses for abrasives include grinding, polishing, buffing, honing, cutting, drilling, sharpening, lapping, and sanding (see abrasive machining). (For simplicity, "mineral" in this article will be used loosely to refer to both minerals and mineral-like substances whether man-made or not.)

Files act by abrasion but are not classed as abrasives as they are a shaped bar of metal. However, diamond files are a form of coated abrasive (as they are metal rods coated with diamond powder).

Read More

Korosi

Korosi (corrosion) atau karat sebenarnya adalah gejala kebalikan dari proses produksi besi dari bijihnya. Bila membuat besi dari bijih besi memerlukan usaha yang sangat sulit, tetapi pada proses korosi justru sebaliknya. Bahan korosif malah akan dengan sangat mudah tergerus habis dan kembali menjadi bijih agar bisa menyatu dengan alam.

Read More

Sandblasting

Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.

Read More

Elcometers

Elcometer

456 Integral Coating Thickness Gaug

Part Number      : A456FBI1 Description        : Basic Ferrous Integral Scale 1 Metric                : 0 – 100 μm Imperial             : 0-60 mill

Read More

Blasting Equipment

1. Standart Blasting Hose (Yellow Stripe)

I.D 12mm(½") 25mm(1") 32mm(1¼") 39mm (1½")

O.D 27mm 39mm 48mm 56mm

Length 20m/40m 20m/40m 20m/40m 20m/40m

                                                                

Read More

Painting And Coating Equipment

Airless Pump

MODEL         Pressure rasio Max deli Max pressure Noise level Air operation Dimension Weight Application

M 23 23:01 2ℓ/min 150 bar 65~70db 3~ 7 bar 40×45×85 25kg    Lacquer Enamel Stains

P 30 30:1 4 ℓ/min 210 bar 75~80db 2 ~ 7 bar 40×45×90 30 kg Lacquer Enamel Stains

K45 45:1 12.6 ℓ/min 300 bar 95~105db 2 ~ 7 bar 68×72×120 108 kg Tar Epoxy Hi-Solids Heavy Latex

K 68 68:1 11 ℓ/min 450 bar 95~105db 2 ~ 7 bar 68×72×125 108kg Tar Epoxy Zinc Primer High Viscosity Material

MODEL         PRESSURE RASIO MAX DELIVERY MAX PUMP SPEED AIR MOTOR EFFECTIVE DIAMETER STROKE                    MAX AIR INLET  PRESSURE MAX OUTLET PRESSURE AIR INLET SIZE      FLUID INLET SIZE

DP-30:1          30:1 1(4) gpm(liter/min) 60 cycle/min 1 1/4(108) inch(mm) 102mm              100(7) psi(bar) 3000(210) psi(bar) 1/2"(PT)”         3/4"(PT)

DK-45:1         45:1     3.98(15) gpm(liter/min)60 cycle/min 60 cycle/min 10(254) inch(mm) 120mm              100(7) psi(bar) 4500(310) psi(bar) 3/4"(PT) 1/4"(PT)

MODEL         PRESSURE RASIO MAX DELIVERY MAX PUMP SPEED AIR MOTOR EFFECTIVE DIAMETER STROKE                    MAX AIR INLET  PRESSURE MAX OUTLET PRESSURE AIR INLET SIZE      FLUID INLET SIZE

DXT-45:1 45:1     3.98(15) gpm(liter/min) 60 cycle/min 10(254) inch(mm) 120mm              100(7) psi(bar) 4500(310) psi(bar) 3/4"(PT) 1/4"(PT)

DXT-68:1 68:1 2.9(11) gpm(liter/min) 10(254) inch(mm) 60 cycle/min 120mm 100(7) psi(bar) 4500(310) psi(bar)       3/4"(PT) 1-1/4"(PT)

Model Output per cycle Motor Size            Maximum Working Pressure bar (MPa, psi)  Maximum Working Pressure bar (MPa, psi)  Maximum Free Flow Output lpm (gpm)      Output at 60 CPM lpm (gpm)

X30 220cc NXT 3400 217         (21.7,3150) 7 (0.7,100) 38 (10.0)     12.9 (3.4)

X50 250cc NXT 6500 359 (35.9,5200) 7 (0.7,100) 43 (11.3) 15.2 (4.0)

X70 180cc NXT 6500 500 (50.0,7250) 7 (0.7,100) 32 (8.5) 11  (2.9)

Mobile C/W Air Motor Agitator

Capacity                          : 10 litres

Air Operating Pressure   : 1-6kg/cm2 (15-100 psi)

Max Discharge Pressure : 6kg/cm2

                                           (87 psi)

Max Material  Output     : 5 litres/min

Paint Outlet                     : 3/8”

Air Outlet                        : 1/4”

Hollow-Cone Sprayer (75mm-300mm)

Weight: 6 kg

Dimension: 51 x 13 x 13cm

Required airless pump & hose,

and 150 cfm @ 100psi dry cleaned compressed air    

 

Silver Plus Gun

Air Pro Spray

 

 

 Airline Breathing Filter

Clemco Apollo - blast Helmet

Astro Norgen Moisture Separator

 

  APF 3100 Air Filter Catridge

Read More

welcome

SELAMAT DATANG DIWEBSITE KAMI !!

Kami adalah perusahaan yang bergerak dalam bidang kontraktor khususnya jasa pembersihan karat dengan cara abrasive, berikut adalah jasa service kami :

1. JASA SANDBLASTING
2. JASA PAINTING AND COATING
3. JASA WETBLASTING
4. JASA FLOOR COATING
5. INSULATION
6. INTERNAL PIPE

Perusahaan kami memiliki pengalaman kerja untuk service tersebut diatas, salah satunya adalah pekerjaan Sandblasting dan coating.

Read More